This kit is based on Double antibody-Sandwich ELISA detection method and takes 5h assay time. The microplate provided in this kit has been precoated with anti IFN-gamma antibody. Add standard and properly diluted sample into relevant well respectively. After incubation, wash unbound components. Add biotinylated detection antibody. Then, it binds with IFN-gamma bound to precoated antibody. Add HRP-Streptavidin(HRP-SA) and Biotin system (BS). After incubation, wash unbound conjugate with wash buffer. TMB substrate is obtained by amplifying signal twice and used to visualize HRP enzymatic reaction. Wash unbound components and add TMB substrate solution. Then, TMB was catalyzed by HRP to produce a blue color product that turned yellow after adding a stop solution. Read the O.D. absorbance at 450nm in a microplate reader. Calculate the concentration of IFN-gamma in the sample by plotting standard curve. The concentration of the target substance is proportional to the OD450 value.
Put the rest strips into a sealed foil bag with the desiccant. Stored for 1 month at 2-8°C; Stored for 6 month at -20°C
E002
Lyophilized Standard
1vial
2vial
Put the rest standards into a desiccant bag. Stored for 1 month at 2-8°C; Stored for 6 month at -20°C
E0030
Biotin-labeled Antibody
5ml
10ml
2-8°C (Avoid Direct Light)
E0340
HRP-Streptavidin (HRP-SA)
10ml
20ml
E024
TMB Substrate
5ml
10ml
E039
Sample Dilution Buffer
10ml
20ml
2-8°C
E005
assay dilution
2.5ml
5ml
E041
Biotin System (BS, Concentrated, 100X)
60ul
120ul
E042
BS Dilution Buffer
5ml
10ml
E026
Stop Solution
5ml
10ml
E038
Wash Buffer(Concentrated, 25X)
30ml
30ml
E006
Plate Sealer
3 pieces
5 pieces
E007
Product Description
1 copy
1 copy
Recovery
Add a certain amount of IFN-gamma into the sample. Calculate the recovery by comparing the measured value with the expected amount of IFN-gamma in the sample.
Sample Type
Recovery Range(%)
Average(%)
serum(n=10)
90-103
99
EDTA plasma(n=10)
87-104
99
Heparin plasma(n=10)
87-105
95
Linearity
Dilute the sample with a certain amount of IFN-gamma at 1:2, 1:4 and 1:8 to get the recovery range.
Sample Type
1:2
1:4
1:8
serum(n=10)
90-105%
82-98%
82-92%
EDTA plasma(n=10)
86-105%
83-101%
84-92%
Heparin plasma(n=10)
88-99%
83-97%
83-96%
Specificity
Specifically binds with IFN-gamma , no obvious cross reaction with other analogues.
Standard Curve
This product is detected by QC department and meets performance required in the manual. (Laboratory Humidity: 20%-60%; Temperature: 18°C -25°C; Equilibrate TMB substrate to 37°C before staining. After adding into the ELISA wells, incubate for 15min at 37°C in dark.) Due to different assay environments and operations, assay data below and standard curve are provided for reference. Experimenters should establish standard curve according to their own assay.
STD.(pg/ml)
OD-1
OD-2
Average
0
0.216
0.227
0.22
6.25
0.281
0.296
0.287
12.5
0.347
0.365
0.354
25
0.413
0.434
0.421
50
0.491
0.516
0.501
100
0.673
0.708
0.687
200
1.003
1.054
1.023
400
1.852
1.947
1.89
Assay Procedure Summary
Step 1: Take out the required plate wells, add 50ul Cap/Det Ab into each well, then add 50ul Standard or Sample into individual well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure thorough mixing then static incubate for 60 minutes at 37°C.
Washing: Wash the plate twice without immersion.
Step 2: Add 100ul HRP-Streptavidin (orange) into each well, seal the plate and static incubate for 30 minutes at 37°C.
Washing: Wash the plate five times without immersion.
Step 3: Add 90ul TMB substrate solution, seal the plate and static incubate for 10-20 minutes at 37°C. (Accurate TMB visualization control is required.)
Step 4: Add 50ul stop solution. Read at 450nm immediately and calculate.
Precision
Intra-assay Precision: samples with low, medium and high concentration are tested 20 times on the same plate. Inter-assay Precision: samples with low, medium and high concentration are tested 20 times on three different plates.
Item
Intra-assay Precision
Inter-assay Precision
Sample
1
2
3
1
2
3
n
20
20
20
20
20
20
Mean (pg/ml)
12.84
48.8
201.7
12.78
50.23
206.1
Standard deviation
0.61
2.33
9.42
0.6
2.3
9.69
CV(%)
4.74
4.77
4.67
4.67
4.57
4.7
Stability
Perform the stability test for the sealed kit at 37°C and 2-8°C and get relevant data.
ELISA kit(n=5)
37°C for 1 month
2-8°C for 6 months
Average(%)
80
95-100
Notes
For Research Use Only
Usage Notes
Microplate reader (wavelength: 450nm) 37°C incubator (CO2 incubator for cell culture is not recommenced.) Automated plate washer or multi-channel pipette/5ml pipettor (for manual washing purpose) Precision single (0.5-10uL, 5-50uL, 20-200uL, 200-1000uL) and multi-channel pipette with disposable tips(Calibration is required before use.) Sterile tubes and Eppendorf tubes with disposable tips Absorbent paper and loading slot Deionized or distilled water
IFN-gammaAccquant ELISA Kit allows for the in vitro quantitative determination of IFN-gamma concentrations in serum, plasma, tissue homogenates and other biological fluids.
Storage
2-8°C(Sealed), Don't cryopreserve.
Reviews of Monkey IFN-gamma (Interferon Gamma) Accquant ELISA Kit