Human anti-SCFD1 (Sec1 family domain-containing protein 1) antibody Elisa kit

Mfr.No.

EH5045

Sensitivity

1.875ng/ml

Detection Range

3.125-200ng/ml

Reactivity

Human

Assay Duration

3 hours

Assay Type

Indirect

Description

This kit is based on indirect ELISA detection method and takes 3h assay time. The microplate provided in this kit has been precoated with antigen. HRP-antibody is used as detection antibody. Add standard and properly diluted sample into relevant well respectively. After incubation, wash unbound components. Add HRP-detection antibody, then it binds with anti-SCFD1 bound to precoated antibody. Wash unbound components and add TMB substrate solution. Then, TMB was catalyzed by HRP to produce a blue color product that turned yellow after adding a stop solution. Read the O.D. absorbance at 450nm in a microplate reader. Calculate the concentration of anti-SCFD1 in the sample by plotting standard curve. The concentration of the target substance is proportional to the OD450 value.

Alternative Names

Sec1 family domain-containing protein 1 ELISA Kit, SLY1 homolog ELISA Kit, Sly1p ELISA Kit, Syntaxin-binding protein 1-like 2 ELISA Kit, SCFD1 ELISA Kit, C14orf163 ELISA Kit, KIAA0917 ELISA Kit, STXBP1L2 ELISA Kit

Kit Components

Kit Components	Item	Size(48T)	Size(96T)	Storage Condition for Opened Kit
E001	ELISA Microplate(Dismountable)	8x6	8x12	Put the rest strips into a sealed foil bag with the desiccant. Stored for 1 month at 2-8°C; Stored for 6 month at -20°C
E002	Lyophilized Standard	1vial	2vial	Put the rest standards into a desiccant bag. Stored for 1 month at 2-8°C; Stored for 6 month at -20°C
E003	HRP Antibody(Concentrated, 100X)	60ul	120ul	2-8°C (Avoid Direct Light)
E024	TMB Substrate	5ml	10ml	2-8°C (Avoid Direct Light)
E039	Sample Dilution Buffer	10ml	20ml	2-8°C
E040	Antibody Dilution Buffer	5ml	10ml
E026	Stop Solution	5ml	10ml
E038	Wash Buffer(Concentrated, 25X)	15ml	30ml
E006	Plate Sealer	3 pieces	5 pieces
E007	Product Description	1 copy	1 copy

Recovery

Add a certain amount of anti-SCFD1 into the sample. Calculate the recovery by comparing the measured value with the expected amount of anti-SCFD1 in the sample.

Sample Type	Recovery Range(%)	Average(%)
serum(n=10)	89-103	97
EDTA plasma(n=10)	87-105	96
Heparin plasma(n=10)	87-97	95

Linearity

Dilute the sample with a certain amount of anti-SCFD1 at 1:2, 1:4 and 1:8 to get the recovery range.

Sample Type	1:2	1:4	1:8
serum(n=10)	86-103%	86-99%	86-99%
EDTA plasma(n=10)	87-103%	85-94%	87-96%
Heparin plasma(n=10)	90-105%	90-99%	88-100%

Specificity

Specifically binds with anti-SCFD1 , no obvious cross reaction with other analogues.

Standard Curve

This product is detected by QC department and meets performance required in the manual. (Laboratory Humidity: 20%-60%; Temperature: 18°C -25°C; Equilibrate TMB substrate to 37°C before staining. After adding into the ELISA wells, incubate for 15min at 37°C in dark.) Due to different assay environments and operations, assay data below and standard curve are provided for reference. Experimenters should establish standard curve according to their own assay.

STD.(ng/ml)	OD-1	OD-2	Average
0	0.048	0.05	0.049
3.125	0.103	0.108	0.105
6.25	0.154	0.162	0.157
12.5	0.238	0.25	0.243
25	0.409	0.43	0.417
50	0.761	0.8	0.777
100	1.259	1.324	1.285
200	2.189	2.301	2.234

Precision

Intra-assay Precision: samples with low, medium and high concentration are tested 20 times on the same plate.
Inter-assay Precision: samples with low, medium and high concentration are tested 20 times on three different plates.

Item	Intra-assay Precision			Inter-assay Precision
Sample	1	2	3	1	2	3
n	20	20	20	20	20	20
Mean (ng/ml)	5.76	25.24	98.02	6.02	25.37	98.14
Standard deviation	0.24	1.47	4.59	0.32	1.16	3.98
CV(%)	4.21	5.82	4.68	5.26	4.58	4.06

Stability

Perform the stability test for the sealed kit at 37°C and 2-8°C and get relevant data.

ELISA kit(n=5)	37°C for 1 month	2-8°C for 6 months
Average(%)	80	95-100

Notes

For Research Use Only

Usage Notes

Step 1:
Take out the required plate wells, add 50ul Cap/Det Ab into each well, then add 50ul Standard or Sample into individual well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure thorough mixing then static incubate for 60 minutes at 37°C.

Washing:
Wash the plate twice without immersion.

Step 2:
Add 100ul HRP-Streptavidin (orange) into each well, seal the plate and static incubate for 30 minutes at 37°C.

Washing:
Wash the plate five times without immersion.

Step 3:
Add 90ul TMB substrate solution, seal the plate and static incubate for 10-20 minutes at 37°C. (Accurate TMB visualization control is required.)

Step 4:
Add 50ul stop solution. Read at 450nm immediately and calculate.

UniProt ID	Q8WVM8

Applications	ELISA
Applications Notes	anti-SCFD1antibody Elisa kit allows for the in vitro quantitative determination of anti-SCFD1 concentrations in serum, plasma, tissue homogenates and other biological fluids.

Storage	2-8°C(Sealed), Don't cryopreserve.

Have you used this product?

Rate it now..!!

SKU	Supplier No.	Size	Your price	Quantity
BHE10809328	EH5045	48T	$280		Add to Cart
BHE10809328	EH5045	96T	$400		Add to Cart

Human anti-SCFD1 (Sec1 family domain-containing protein 1) antibody Elisa kit

Contact us to order

Tel

Email

Contact us to order

Tel

Email

Reviews of Human anti-SCFD1 (Sec1 family domain-containing protein 1) antibody Elisa kit

Rate it now..!!